1.Step by step setup guide 2.Real Time Save 3.Cheat 4.Multi-save Step-by-step guide to install and setup the Supercard DSONE for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: http://eng.supercard.sc/download.htm B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. c) Select and copy all the unzipped files. The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. 4. Copy the unzipped files to the microSD memory card The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS. SUPERCARD DS(ONE) REALTIME SAVE NDS RealTime Save The ONLY one which support RealTime Save. Save & Load Anytime, Anywhere, Anyway. Only DSONE has this function. Here list below will instruduce how to use this powful function: The request of using RealTime Save function: 1. DSONE OS v3.0 and Up 2. Should be run in patch mode. And select the “Real Time Save†option. 3. How to enable RealTime Save function: Click “SET PATCH†from File Information window or press hotkey L+X Select “Enable Patch†and “Real Time Save†option. Hotkey for RealTime Save function in the game: L+R+UP+SELECT How to use RealTime Save function in the game: 1. Enable the RealTime Save function. Note: The first time to run a game with RealTime Save function need more time to load. Because sysem need time to create a RealTime Save file. 2. Press Hotkey L+R+UP+SELECT to enter RealTime Save menu Note: recommend PAUSE the game first and then enter RealTime Save menu 3. Select SAVE or LOAD the game. Note: If there is a noise after loading, please PAUSE and RESUME to avoid it. SUPERCARD DS(ONE) CHEAT CODE Cheat Code DIY Manual Introduce DS ONE OS 2.0 added NDS game cheat code function. Player can on/off each cheat code option dividually when playing the game. Player can press Hotkey to switch between cheat code menu and game play screen. It's a real time cheat code. The best cheat code system in the world. DS ONE NDS cheat code file DS ONE use special cheat code file *.scc, player can use software convert *.cht to *.scc easily, so play can add, modify and delete the cheat code by themself. And this convert software also support *.cht file with create by Emu-Cheat. It's very easy to make your own cheat code file by yourself. Q:How to create *.cht cheat code file? Alease use Emu-Cheat software to creat *.cht file, Or download the *.cht file from internet directly. Q:How to convert *.cht to *.scc? A: * 1. Run cht2supercardcheat.exe * 2. Click "Make Cheat" button. * 3. Select the .CHT file which you want to convert. Q:How to use *.scc cheat code file? A:There are two methods: * 1. If the ROM in the database. You can rename *.scc to the ROM series runber, and put the *.scc to scshellcheat. Example: If you have a ROM "0061 - Bomberman (U)" which in the patch database, you can rename the .scc file to 0061.scc and put it into scschellcheat folder. * 2. If there is a new ROM not in the database, You should rename the *.scc file name to match the ROM name. And put the ROM and *.scc in the same folder. Example: If you hava a ROM "1060 - SuperMan" which is not in the patch database, you can rename the *.scc file to "1060 - SuperMan.scc", and put it with the ROM file together. RealTime Cheat Code The most powerful cheat code system in the world. DSONE not only has the function which can turn ON/OFF all the cheat code like other similar product, but also has the exclusive function to enter a cheat code MENU to turn ON/OFF the cheat code individually at anytime,. Only DSONE has this function. # The request of using RealTime Cheat Code function: 1. DSONE OS v3.0 and Up 2. Should be run in patch mode. And select the “Enable Cheat†option. 3. How to enable RealTime Save function: Click “SET PATCH†from File Information window or press hotkey L+X Select “Enable Patch†and “Enable Cheat†option. 3. Make sure the the relative *.scc cheat code file in the folder scshellcheat. DSONE profice more than 500 .scc files in default. If the cheat code system can not work, that mean the *.scc file is unavailable. # How to get .scc file if unavaiable? 1. SuperCard Team will continue release new *.scc file. 2. Player can make the *.scc file by themselves. Please reference readme.txt from cheat code tools which can be download from: http://eng.supercard...oft_scdsone.htm # Hotkey for RealTime Cheat Code function in the game: L+R+START+UP: Enter Cheat Code Menu, ON/OFF cheat code, B resume game L+R+START+Left: ON all cheat code without enter Cheat Code Menu, Default Turn ON L+R+START+Right: Turn off all cheat code without enter Cheat Code Menu # Exclusive technology in DSONE cheat code syatem. 1. RealTime Cheat Code funxtion, can enter cheat code menu at any time. 2. Will NOT slow down when cheat code is enable. SUPERCARD DS(ONE) MULTI-SAVE DSONE One game support Multi-Save files. Unlimited save storage beyond original performance. # The request of using Multi-Save function: 1. DSONE OS v2.0 and Up 2. How to enable RealTime Save function: Click “MULTISAVER†from File Information window, press X to open the window A Multi-Save menu list below. ADD: Add a save slot, upto 4 save slots. Note: Need 5 seconds to create a save slot file. DEFAULT: Set a save slot as a default, system will save & load from default slot automaticly DEL: Delete a save slot. COPY: Copy a slot to others. # How to use this Multi-Save function? Some games have three built-in save slot, that’s good. But some games have only one built-in save slot, such as “Lost in Blueâ€. This function can help you have more extra save slots for the game which has only one built-in save.
R4i Gold Setup Guide Step-by-step guide to install and setup the R4i Gold for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.r4ids.com. B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Select and copy all the unzipped files. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the flashcart. When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
Acekard 2i Firmware Fix For DSi Firmware 1.4 Important: if you want to update you AceKard 2i on your DSi console, please make sure that your DSi console is having a firmware version lower than 1.4. If your DSi has been updated to version 1.4, you will need to use a DS Lite console to update your Acekard 2i. Please take note, the firmware is different from the driver. If you think that this guide is helpful for other users, please share it with your friends, family members and other users on various online forums. After all, all great things are to be shared! If you do not know how to check the firmware version, please visit our guide here. 1. Check if your Acekard has the driver on. If you can see the following Acekard operating system interface on your DSi or DS Lite console, that means your Acekard DSi driver is on. If your Acekard 2i does not have the driver on, please visit the driver installation guide here. 2. Now, download the firmware from here . 3. Unzip the firmware file downloaded, there are two firmware update files a) For DSi :ak2ifw_update_14_DSi.nds B) For DS Lite :ak2ifw_update_14_DSL.nds c) If you have multiple Acekard 2i cards that you wish to update all in a row, run on the DS Lite console using ak2ifw_update_14_DSL.nds 4. Now copy the appropriate firmware file to the root folder of the microSD memory card. 5. Plug in the microSD to the Acekard 2i and insert the Acekard 2i to the DS console. 6. Select the microSDCard icon on the main operating system 7. Select the firmware file AK2IFW_UPDATE_14_DSI.NDS by pressing A on the right hand side control pad. 8. You will be prompted if you want to update the firmware as follows: 9. Press Start on the DS to continue 10. The following screen shows that the update has been started. 11. The following screen shows that the update is halfway done. 12. The following screen shows that the update has been completed. Congratulation! Restart your DS now. 13. The Acekard icon on the DSi main menu has been changed to that for DANNY PHANTOM URBAN JUNGLE THQ. 14. Enjoy!
Supercard DS ONEi Setup Guide Firmware Upgrade and Driver Installation The complete and step-by-step idiot’s guide for updating Supercard DSONEi Firmware Fix Version 1.1 For DSi Firmware 1.4E, 1.4J, 1.4U, 1.4A & 1.4X If you think that this guide is helpful for other users, please share it with your friends, family members and other users on various online forums. After all, all great things are to be shared! Important: please make sure that your DSi is fully charged or powered to the wall to ensure the update to go through without interuption. The complete and step-by-step idiot’s guide to update the firmware: * Download the firmware version 1.1 (English Version) from here . * Unzip the file and place the unzipped file updateen.bin under the root folder of the microSD. * Plug in the microSD into the DSONEi. * Plug in the DSONEi into the Firmware Writer. * Plug in the Firmware Writer into the USB port of your PC. * The LED light on the Firmware Writer will start flashing in RED, meaning that the update is in process. Do not unplug the firmware writer until the LED light stops flashing. * The update process takes about 8 minutes. * Once the LED light turns GREEN, it means that the update is completed. The Supercard Icon has been changed to that of Star Wars Lethal Alliance Ubisoft. * If the LED light turns RED (without flashing), it means the update is unsuccessful. Please repeat the whole process from step 1. Enjoy! Step-by-step guide to install and setup the Supercard DSONEi / DS Onei for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: http://eng.supercard.sc/download.htm B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. c) Select and copy all the unzipped files. The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. 4. Copy the unzipped files to the microSD memory card The above pictures are based on R4i SDHC. The file names for Supercard DSONE Ultra differs from those belonged to R4i SDHC. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS. SUPERCARD DS(onei) Unlimited Upgrade Q: What's the function of the Firmware writer? A: Only use in this situation: If the software of console upgraded and do not recognize DSONEi. Firmware writer can renew the firmware of DSONEi. And DSONEi can work again. Q: How to use Firmware writer? A: Please download Newest Firmware from http://eng.supercard.sc. Copy downloaded firmware to microSD insert into DSONEi then insert into Firmware writer then into USB port for power supply and operation. No extra software need, the Firmware writer will renew the firmware of DSONEi automatic. 8 Mins. needed. Flashing light mean renew in progress. Green light mean renew finished. Red light mean renew failed. If failed, please repeat the progress. SUPERCARD DS(ONE) REALTIME SAVE NDS RealTime Save The ONLY one which support RealTime Save. Save & Load Anytime, Anywhere, Anyway. Only DSONE has this function. Here list below will instruduce how to use this powful function: The request of using RealTime Save function: 1. DSONE OS v3.0 and Up 2. Should be run in patch mode. And select the “Real Time Save†option. 3. How to enable RealTime Save function: Click “SET PATCH†from File Information window or press hotkey L+X Select “Enable Patch†and “Real Time Save†option. Hotkey for RealTime Save function in the game: L+R+UP+SELECT How to use RealTime Save function in the game: 1. Enable the RealTime Save function. Note: The first time to run a game with RealTime Save function need more time to load. Because sysem need time to create a RealTime Save file. 2. Press Hotkey L+R+UP+SELECT to enter RealTime Save menu Note: recommend PAUSE the game first and then enter RealTime Save menu 3. Select SAVE or LOAD the game. Note: If there is a noise after loading, please PAUSE and RESUME to avoid it. SUPERCARD DS(ONE) CHEAT CODE Cheat Code DIY Manual Introduce DS ONE OS 2.0 added NDS game cheat code function. Player can on/off each cheat code option dividually when playing the game. Player can press Hotkey to switch between cheat code menu and game play screen. It's a real time cheat code. The best cheat code system in the world. DS ONE NDS cheat code file DS ONE use special cheat code file *.scc, player can use software convert *.cht to *.scc easily, so play can add, modify and delete the cheat code by themself. And this convert software also support *.cht file with create by Emu-Cheat. It's very easy to make your own cheat code file by yourself. Q:How to create *.cht cheat code file? Alease use Emu-Cheat software to creat *.cht file, Or download the *.cht file from internet directly. Q:How to convert *.cht to *.scc? A: * 1. Run cht2supercardcheat.exe * 2. Click "Make Cheat" button. * 3. Select the .CHT file which you want to convert. Q:How to use *.scc cheat code file? A:There are two methods: * 1. If the ROM in the database. You can rename *.scc to the ROM serie s runber, and put the *.scc to scshellcheat. Example: If you have a ROM "0061 - Bomberman (U)" which in the patch database, you can rename the .scc file to 0061.scc and put it into scschellcheat folder. * 2. If there is a new ROM not in the database, You should rename the *.scc file name to match the ROM name. And put the ROM and *.scc in the same folder. Example: If you hava a ROM "1060 - SuperMan" which is not in the patch database, you can rename the *.scc file to "1060 - SuperMan.scc", and put it with the ROM file together. RealTime Cheat Code The most powerful cheat code system in the world. DSONE not only has the function which can turn ON/OFF all the cheat code like other similar product, but also has the exclusive function to enter a cheat code MENU to turn ON/OFF the cheat code individually at anytime,. Only DSONE has this function. # The request of using RealTime Cheat Code function: 1. DSONE OS v3.0 and Up 2. Should be run in patch mode. And select the “Enable Cheat†option. 3. How to enable RealTime Save function: Click “SET PATCH†from File Information window or press hotkey L+X Select “Enable Patch†and “Enable Cheat†option. 3. Make sure the the relative *.scc cheat code file in the folder scshellcheat. DSONE profice more than 500 .scc files in default. If the cheat code system can not work, that mean the *.scc file is unavailable. # How to get .scc file if unavaiable? 1. SuperCard Team will continue release new *.scc file. 2. Player can make the *.scc file by themselves. Please reference readme.txt from cheat code tools which can be download from: http://eng.supercard...oft_scdsone.htm # Hotkey for RealTime Cheat Code function in the game: L+R+START+UP: Enter Cheat Code Menu, ON/OFF cheat code, B resume game L+R+START+Left: ON all cheat code without enter Cheat Code Menu, Default Turn ON L+R+START+Right: Turn off all cheat code without enter Cheat Code Menu # Exclusive technology in DSONE cheat code syatem. 1. RealTime Cheat Code funxtion, can enter cheat code menu at any time. 2. Will NOT slow down when cheat code is enable. SUPERCARD DS(ONE) MULTI-SAVE DSONE One game support Multi-Save files. Unlimited save storage beyond original performance. # The request of using Multi-Save function: 1. DSONE OS v2.0 and Up 2. How to enable RealTime Save function: Click “MULTISAVER†from File Information window, press X to open the window A Multi-Save menu list below. ADD: Add a save slot, upto 4 save slots. Note: Need 5 seconds to create a save slot file. DEFAULT: Set a save slot as a default, system will save & load from default slot automaticly DEL: Delete a save slot. COPY: Copy a slot to others. # How to use this Multi-Save function? Some games have three built-in save slot, that’s good. But some games have only one built-in save slot, such as “Lost in Blueâ€. This function can help you have more extra save slots for the game which has only one built-in save.
EDGE DS Setup Guide Step-by-step guide to install the Edge DS with the latest Driver/Kernel/Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.edge-ds.cn B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar/Winzip) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar/Winzip can be downloaded from www.download.com. Note: the following uses the R4 SDHC driver for illustrative purpose. The setup procedure is exactly the same for EDGE except that the driver files are different. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
DSTT & DSTTi Setup Guide For Firmware 1.4 Upgrade and Driver Installation Upgrade the DSTTi 1.4 Firmware to support DSi firmware 1.4 What you will need to update your DSTTi Card: -DSi Console with Firmware lower than 1.4X (1.4E, 1.4J, 1.4U & 1.4A) e.g 1.3 or 1.2 OR -DS Lite Console -DSTTi Card Loaded with Standard Firmware V1.17 -DSTTi Update for DSi 1.4 Download from here or the official website www.ndstt.com To Check Your DSi Firmware Version: -Click 'Setting' on the Main Menu -In the right hand corner of the top screen it will say VER 1.X STEPS: -Unzip 'DSTTi_v1.4_firmware.rar' you will then have three files: rom_pcb1.dat rom_pcb2.dat TTi14UPGRADE.nds -Copy the three files to the root of the Micro SD memory card. -Place the Micro SD back into the DSTTi Card and insert into DSL/DSi Console -Select the Firmware file TTi14UPGRADE.nds -Follow the on screen instructions to complete the rest, which should not take long. Step-by-step guide to install the DSTT and DSTTi with the latest Driver:[/b] 1.Download the latest driver/kernel/firmware The driver/kernel/firmware can be downloaded from a) The official website: www.ndstt.com B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format Unzip the file downloaded (using Winrar) on your PC Unzip the driver/kernel/firmware file. B) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
Acekard 2, 2.1 & 2i Setup Guide Acekard Driver Setup Guide 1. Download the latest driver/kernel/firmware from: a) The official website: www.acekard.com B) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Select and copy all the unzipped files. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew game s to the microSD memory card 6. Plug in the microSD to the Acekard. When inserting or changing carts on slot-1, switch off the DSL / DSi, insert in the cart and then start the DSL / DSi. Follow the instructions on the DS Lite / DSi screen and off you go! Enjoy your portable multimedia centre on DS Lite / DSi.
iPlayer / DSiPlayer Setup Guide Firmware Upgrade and Driver Installation Downloadable drivers and patches are highlighted in blue. Click the blue text to download the corresponding files directly. iPlayer OS * ·iPlayer OS v1.3 & firmware v1.06 * ·iPlayer OS v1.2 & firmware v1.06 * ·iPlayer OS v1.1 & firmware v1.05 * ·iPlayer OS v1.0 * Just download the OS above by clicking the OS title and copy the unzipped system fils to the TF. iPlayer Patch * ·for moonshell reset * moonshell 1.7x lease copy the reset.mse into moonshlplugin. * moonshell 2.x lease copy the IPLY.nds into MOONSHL2RESETMSE. * iPlayer Dldi source Code * ·iplayer didl Code Homebrew * ·iPlayer GBA Emulator ver1.0 by Darkchen! * How to use: 1st, Make sure the fireware and OS of your iPlayer is the lastest version 2nd, There are CHT/ENG 2 emulators in the zip file. Install the one which fit your iPlayer 3rd, Copy the whole NDS-GBA folder and files into /_system/ * ·NES Emulator * How to use: Copy the nesDS.nds file to MicroSD, run it from iPlayer homebrew menu. * ·MD Emulator * How to use: Copy the jEnesisDS.nds file to MicroSD, run it from iPlayer homebrew menu. * ·GB Emulator * How to use: Copy the lameboy.nds file to MicroSD, run it from iPlayer homebrew menu.
Supercard DSTWO Firmware Update Latest Firmware Download SuperCard DSTWO EOS v1.02 SuperCard DSTWO GBA Plugin v1.21 How to install * Format your MicroSD. (Not really necessary, but it helps to run smoothly) * Unzip the file you downloaded. * Copy everything to the root of your MicroSD.
EZ Flash 5i / Vi Setup Guide Firmware Upgrade and Driver Installation Step-by-step guide to install and setup the EZ Flash 5i for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.ezflash.cn b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The above pictures are based on R4i SDHC. The file names for EZ Flash 5i driver differ from those belonged to R4i SDHC. c) Select and copy all the unzipped files. The above pictures are based on R4i SDHC. The file names for EZ Flash 5i driver differ from those belonged to R4i SDHC. 4. Copy the unzipped files to the microSD memory card The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
N5 DS Setup Guide Step-by-step guide to install the N5 DS with the latest Driver/Kernel: 1. Download the latest driver/kernel/firmware from: a) The official website: www.dsn5.com b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card a) Unzip the driver/kernel/firmware file. b) Winrar/Winzip can be downloaded from www.download.com. Note: the following uses the R4 SDHC driver for illustrative purpose. The setup procedure is exactly the same for N5 except that the driver files are different. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
Genuine iEDGE Firmware Boostrap & OS Setup Guide Important: this guide is based on windows PC, NOT MAC. Before flashing the iEDGE, if you insert the iEDGE into the slot-1 of the DSi, you can see the following. That means the iEDGE has not been flashed yet. You need to start the setup from Step 1. If you can see the Sudoku icon instead of the BLACK EDGE icon, good news for you. Your iEDGE has been flashed with the correct firmware. Please proceed to step 11 to setup the OS. Step 1 FORMAT the MicroSD card with supplied IEDGE USB microSD card reader in Full. Once the formating is done, DO NOT remove the microSD or the microSD card reader. Take note: * The file system for the format SHOULD be FAT32. * The microSD card reader used should be the one came with iEDGE. Step 2 Get the bootstrap update application EdgeBootUpdate-v1.exe ready. Make sure that the application is on your PC instead of the microSD. The easiest way is to place the file on your desktop. If you do not have the bootstrap update application, please download it from here. Step 3 Get the Sudoku ready. For information on how to obtain the Sudoku, please refer to the iEDGE Bootstrap v1 Updater (Windows) Readme text file from EDGE team. Similar to the bootstrap update application, please put the Sudoku on your desktop. Step 4 Run the EDGEBootUpdate-v1.exe bootstrap update file and you can see the following window with the title iEDGE Boot Update. The application automatically identify your microSD memory card. In this example, it is at drive J: Step 5 Locate the Sudoku, which was placed on the desktop, if you have been following every step mentioned above. Step Step 6 Click Update to continue the flashing. Step 7 Flashing is done. At the same time, a new window pops up. It is the root folder of the microSD memory card. In this case, it is called the drive J removal disk. Under the root folder of the microSD, there is new file generated from the flashing process mentioned above. A new filebupdate BIN file has been written to microSD root folder. Important: bupdate BIN file is required for updating the iEDGE cart on the DS in the next step. If you can't see the bupdate BIN file, please restart from step 1. Step 8 Plug in the wall power adapter for your DSi. This is vital as flashing can't be interrupted. Do not turn on the DSi yet. Plug in the microSD to the iEDGE and then the iEDGE into the slot-1 of the DSi. Turn on the DSi. Do not press any button of the DSi. Leave the DSi on a table or flat surface. Bootstrap update flashing should start almost immediately. Step 9 This is the most crucial part of the bootstrap flashing. Look at the iEDGE in the slot-1. The LED light inside the iEDGE should be visible as below (orange). If the bootstrap flashing functions correct, the LED light should flash on and off. If the LED light is constantly on, that means that flashing does not function correct. Please restart the process from step 1. The flashing will intensify slowly and the LED light will be off when the flashing is completed. Step 10 If you have come this far to this step, congraduation! You have successfully flashed the iEDEG, the most difficult part of the whole process.Xpertron Support - EDGE DS Step 11 Download the latest driver/kernel/firmware from the official website: www.edge-ds.cn Step 12 Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card Step 13 Unzip the file downloaded (using Winrar/Winzip) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar/Winzip can be downloaded from www.download.com. Note: the following uses the R4 SDHC driver for illustrative purpose. The setup procedure is exactly the same for EDGE except that the driver files are different. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. Step 14 Copy the unzipped files to the microSD memory card Step 15 Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card Step 16 Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS. You should see the Sudoku icon. If you still see the following, that means the bootstrap flashing is not done successfully. Please repeat from step 1 again and follow the steps one by one. Important: after lauching the Sudoku iEDGE programme, if you see the white screen for over 1 minute, please reboot your DSi. 0 * + * -
Hyper R4i Setup Guide Firmware Upgrade and Driver Installation Step-by-step guide to install and setup the R4i Hyper for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.hyper-r4i.com. b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The picture is based on R4i SDHC. The actual file names may differ. c) Select and copy all the unzipped files. The picture is based on R4i SDHC. The actual file names may differ. 4. Copy the unzipped files to the microSD memory card The picture is based on R4i SDHC. The actual file names may differ. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the flashcart. When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
iTouch 2 Setup Guide Step-by-step guide to install and setup the iTouch 2 for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.itouchds.com b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The above pictures are based on R4i SDHC. The file names for iTouch 2 driver differ from those belonged to R4i SDHC. c) Select and copy all the unzipped files. The above pictures are based on R4i SDHC. The file names for iTouch 2 driver differ from those belonged to R4i SDHC. 4. Copy the unzipped files to the microSD memory card The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
R4i SDHC Setup Guide Step-by-step guide to install and setup the R4i SDHC for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.r4i-SDHC.com b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Select and copy all the unzipped files. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
R4 Revolution Version 2 Setup Guide Setup Guide & Support 1. Video Installation Guide on Youtube 2. Step-by-Step Text Installation Guide 3. How to differentiate a original R4 Version 2 cartridge from the widespread copies? R4 Revolution Version 2 Support & Guide Video Installation Guide on Youtube Disclaimer: Xpertron does not produce this guide nor is responsible for any usage of the guide. Step-by-step guide to install the R4 Version 2 with the latest Driver/Kernel/Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.r4ds.cn b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD in to the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS. How to differentiate a original R4 Version 2 cartridge from the widespread copies? The microSD memory card outline is much thicker on the original R4 Revolution Version 2 than the one on the copy. The original R4 Revolution Version 2 is manufactured with the chip nicknamed 0815 as it is the chip model number printed on the chip. The copies have 0817 chip on the electronic board.
R4 Revolution Version 3 SDHC Setup Guide Setup Guide 1. Video Guide on Youtube 2. Step-by-Step Text Guide by Xpertron Note: The video guide is based on R4 Version 2. The only difference between setting up R4 Version 2 and R4 Version 3 is the different versions of driver/kernel/firmware. Please refer to the below for the correct driver. Disclaimer: Xpertron does not produce this guide nor is responsible for any usage of the guide. Step-by-step guide to install the R4 Version 3 SDHC with the latest Driver/Kernel/Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.ndslr4.com b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. c) Open the unzipped folder. The name of the folder could vary. d) Select and copy all the files shown below. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
R4i Ultra Setup Guide Step-by-step guide to install and setup the R4i Ultra for Nintendo DS Lite and DSi with the latest Driver / Kernel / Firmware: 1. Download the latest driver/kernel/firmware from: a) The official website: www.r4ultra.com b) Our UK server here - it is faster than the official website 2. Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. b) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar) on your PC a) Unzip the driver/kernel/firmware file. b) Winrar can be downloaded from www.download.com by searching for Winrar at the Search. The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC. c) Select and copy all the unzipped files. The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC. 4. Copy the unzipped files to the microSD memory card The above pictures are based on R4i SDHC. The file names for R4i Ultra differs from those belonged to R4i SDHC. 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the Acekard.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
M3 DS Setup Guide Step-by-step guide to install the M3 DS Real Rumble Pack with the latest Driver/Kernel/Firmware: Download the latest driver/kernel/firmware from: a) The official website: www.m3adapter.com B) Our UK server here - it is faster than the official website Before copying the driver/kernel to the microSD, please format your microSD on your PC. This is to remove all the data on the memory card. a) After inserting the microSD into the card reader, go to My Computer. B) Right click the driver representing the microSD memory card. c) Choose Format d) Click Start to format the memory card 3. Unzip the file downloaded (using Winrar/Winzip) on your PC a) Unzip the driver/kernel/firmware file. B) Winrar/Winzip can be downloaded from www.download.com. Note: the following uses the R4 SDHC driver for illustrative purpose. The setup procedure is exactly the same for M3 except that the driver files are different. c) Open the unzipped folder. The name of the folder could vary. 4. Copy the unzipped files to the microSD memory card 5. Copy your own files, including music, movies, pictures and homebrew games to the microSD memory card 6. Plug in the microSD to the R4.When inserting or changing carts on slot-1, switch off the DS, insert in the cart and then start the DS.
Supercard DSTWO Setup Guide Step 1 Download the OS from www.supercard.sc. Step 2 Unzip and copy the system folder _dstwo to the root of microSD. Step 3 Copy the game files to the microSD, insert the microSD into DSTWO.
