1. This forum is in read-only mode.

Router Wap2 to WEP

Discussion in 'Technical Help' started by yourgam3, Jun 30, 2009.

Thread Status:
Not open for further replies.
  1. yourgam3

    yourgam3 Member

    i got a problem with my router.
    ok i have the next:
    [​IMG]
    on a tut stays this:
    where do i put the 2 and what other stuff do i need to fill in to get nintendo wi fi
     
    yourgam3, Jun 30, 2009
    #1
  2. Loonylion

    Loonylion Administrator Staff Member

    you need to enter a 10 character string in the box labelled '1'. you may only use numbers 0-9 and letters a-f in the string. You will also have to put this string into the NDS.
     
    Loonylion, Jun 30, 2009
    #2
  3. yourgam3

    yourgam3 Member

    do you mean key 1???
    because i dont understand it good
     
    yourgam3, Jun 30, 2009
    #3
  4. Loonylion

    Loonylion Administrator Staff Member

    yes
     
    Loonylion, Jun 30, 2009
    #4
  5. yourgam3

    yourgam3 Member

    do i need only to do it in key 1 or also in the others and where do i need to put that 2
     
    yourgam3, Jun 30, 2009
    #5
  6. Loonylion

    Loonylion Administrator Staff Member

    only in key 1, leave the others blank. Make sure you know what it is because your NDS will need it to connect.
     
    Loonylion, Jun 30, 2009
    #6
  7. yourgam3

    yourgam3 Member

    yes but where do i need to put that 2
    because that was in the guide
     
    yourgam3, Jun 30, 2009
    #7
  8. Loonylion

    Loonylion Administrator Staff Member

    you use key 1 instead of key 2. The guide just uses a different key.
     
    Loonylion, Jun 30, 2009
    #8
  9. yourgam3

    yourgam3 Member

    i thought were you could choose 1 2 3 or 4
     
    yourgam3, Jun 30, 2009
    #9
  10. Loonylion

    Loonylion Administrator Staff Member

    yes, you can choose, I'm just telling you to use 1 because its easier. If you don't use 1 you have to change another setting to tell it which one you are using.
     
    Loonylion, Jun 30, 2009
    #10
Thread Status:
Not open for further replies.