1. This forum is in read-only mode.

Please help i'm demented with my ds

Discussion in 'Non-Emulation Help' started by laurabell424, Jan 1, 2010.

  1. laurabell424

    laurabell424 Member

    I'm a new user to this and have extracted the nds files i need, all looks ok on the comp but when i put the card in the ds i'm getting a blank screen with only a red pic of a card that says menu in it??
     
  2. funguy

    funguy Well-Known Member

    that means your card is looking for the firmware

    what flashcard are you using ?
     
  3. laurabell424

    laurabell424 Member

    its r4i-sdhc? i was a bit premature in posting this and have now downloaded a firmwear thing, do i just put this file straight onto the r4 card?
     
  4. funguy

    funguy Well-Known Member

    it will need to be unpacked using winrar to obtain the files, which all need to go on to your microSD card
     
  5. laurabell424

    laurabell424 Member

    Thank you, hopefully will work now
     
  6. funguy

    funguy Well-Known Member

    fingers crossed
     
  7. m3romz

    m3romz Well-Known Member

    Also try updating the firmware!
     
  8. laurabell424

    laurabell424 Member

    k so now i've got a stage further than the angry looking lil red menu chip... stuck on the loading screen though, have i put the wrong firmwear on?
     
  9. funguy

    funguy Well-Known Member

    maybe, where did you get your firmware from? and did you put onto your microSD as it came? i mean you didn't put it all into 1 folder?
     
  10. laurabell424

    laurabell424 Member

    linfoxdomain.com, i saved it onto the card and then did the extraction to split it all out.
     
  11. funguy

    funguy Well-Known Member

    there are lots of different R4's, are you sure you got the correct firmware?
     
  12. laurabell424

    laurabell424 Member

    i'm just going by the tutorial advice and have downloaded the one based on the website quoted on the card.....other advise is trial and error of all the rest..... could be a long night
     
  13. titen96

    titen96 Well-Known Member

    then go to the website it says on the card download the firmware and extract all the files to the root of your sd card
     
  14. funguy

    funguy Well-Known Member

    if you got it from the website quoted on the box the card arrived in, then it should work,

    are you using a DS or DSi?
     
  15. laurabell424

    laurabell424 Member

    the ds, christmas present, along with the card and this web address....it's now new years day and i still cant get on the thing
     
  16. titen96

    titen96 Well-Known Member

    it should still work for the ds dsi and the old ds what exactly do you do when you get the firmware
     
  17. funguy

    funguy Well-Known Member

    Re: Please help i\'m demented with my ds

    i'll try to help you get it up and running, it just sounds like you have the right firmware, but just put on your microSD card incorrectly
    Post Merge: [time]1262381533[/time]
    not if it was the DSi v1.4 titen
     
  18. titen96

    titen96 Well-Known Member

    sorry i forgot
     
  19. laurabell424

    laurabell424 Member

    i may not be putting the downloaded files onto the correct part of the mini card, i'm just selecting the usb drive to save for the download, is this not saving it to the root?
     
  20. titen96

    titen96 Well-Known Member

    you put the roms in a folder in your sd card then you put the kernel or firmware in the root of your sd card which is the spot where you just opened your sd card you dont keep any zipped or rar files