1. This forum is in read-only mode.

no .mcr files in memcard folder

Discussion in 'Technical Help' started by shadowghost350, Nov 11, 2008.

Thread Status:
Not open for further replies.
  1. shadowghost350

    shadowghost350 Well-Known Member

    well it appears I have no .mcr files the memcards folder for ePSXe
     
  2. Almo

    Almo Well-Known Member

    ePSXe will create them when you save a game. If you havnt already open up ePSXe, open an iso, play a little and save. it should give you a .mcr file. If not then something crazy is going on. Most of the time I used save states anyway.
     
  3. shadowghost350

    shadowghost350 Well-Known Member

    I saved and theres still no .mcr files
     
  4. shadowghost350

    shadowghost350 Well-Known Member

    what nobody can help me with this
     
  5. TirithRR

    TirithRR Well-Known Member

    What is the file/path location in the ePSXe configuration?
     
  6. Reemr

    Reemr Well-Known Member

    Are you using save states or saving in game?
     
  7. shadowghost350

    shadowghost350 Well-Known Member

    I'm saving in game and I've checked the path and it does lead to the memcard folder
     
  8. TirithRR

    TirithRR Well-Known Member

    What is the file name?

    epsxe000.mcr
    epsxe001.mcr
    epsxe002.mcr
    etc?

    They should be stored in epsxe/memcards/*.*

    When you run your game and try to load a saved game from your card, is the card empty? Also, if you have multiple copies of ePSXe installed (Like 1.5.2, 1.6.0, and 1.7.0) make sure you are looking in the correct memcards folder.
     
  9. Almo

    Almo Well-Known Member

    There are no fie names at all, as he stated there are no memory card files at all.
     
  10. TirithRR

    TirithRR Well-Known Member

    There *has* to be a file name in his ePSXe configuration. If there is no file name then it will not make the file.
     
  11. shadowghost350

    shadowghost350 Well-Known Member

    nothing but this one file in memcards and heres the file path
     
  12. TirithRR

    TirithRR Well-Known Member

    What about your configuration?
     
  13. shadowghost350

    shadowghost350 Well-Known Member

    this is a bit werid
     
  14. TirithRR

    TirithRR Well-Known Member

    Ok, I think I found the problem.


    Can you post the full path from the configuration?

    I just tested out some things:

    My memory card path for Slot 1 is:
    C:\Documents and Settings\Basic\Desktop\PSX\epsxe170\memcards\epsxe002.mcr

    I changed it to:
    C:\Documents and Settings\Basic\Desktop\PSX\playstation\memcards\epsxe002.mcr

    I loaded up the Playstation BIOS and checked out the memory cards. It treated it like I had a card in Slot 1. So I copied some games from the card in Slot 2. It worked correctly, and I hit Exit, and then went back and it was still there. But I closed ePSXe and reopened it, and checked Memory Card 1 again. It was empty. I went to my PSX folder and looked for a folder called "playstation" and it did not exist.

    I believe that if the folder does not exist, then the file is never properly made. I think your file name may be correct but your path maybe isn't. It's trying to create the memory card file in a folder path that isn't there.


    PS. I checked this because I noticed your ePSXe folder was renamed "Playstation". I have mine still set to the default that came with 1.7.0 that is "epsxe170". I think that when you renamed the folder the default configuration for the memory cards wasn't changed with it.
     
  15. shadowghost350

    shadowghost350 Well-Known Member

    I tried changing back to the original name and still got the same
    C:\Documents and Settings\Owner\Desktop\Roms\memcards\crash_warped_1.mcr
     
  16. TirithRR

    TirithRR Well-Known Member

    According to your screenshots, which show the folder tree, your card location should be:

    C:\Documents and Settings\Owner\Desktop\Roms\Playstation\memcards\crash_warped_1.mcr


    Since I can repeat your issue by having the wrong folders in the memcard config, I'm 90% certain this is the issue.
    If you still cannot get this to work, try something real simple like:

    C:\crash_warped_1.mcr

    This will remove the folder issue all together and just put the memcard file on the root of your drive. It's not the best solution but it will show that the issue is not with ePSXe itself but with the path placed in the configuration of the memory card.
     
  17. shadowghost350

    shadowghost350 Well-Known Member

    I moved the memcards folder into the roms folder I think it might work now
     
  18. TirithRR

    TirithRR Well-Known Member

    Let us know, or else I won't be able to sleep tonight cause I'll be thinking "Did it work?"

    :)
     
  19. shadowghost350

    shadowghost350 Well-Known Member

    it works ;D
     
Thread Status:
Not open for further replies.