1. This forum is in read-only mode.

Help (4125) Super Robot Gakuen

Discussion in 'Technical Help' started by Kentang_goreng, Aug 27, 2009.

Thread Status:
Not open for further replies.
  1. oke so I m using R4 and when on the beginning screen it Refuses to acknowledge the button press someone help me pls ???
     
  2. TirithRR

    TirithRR Well-Known Member

    Has the game froze, or are you just pressing the wrong button?

    Take a look in the Common Issues thread about game freezes.
    https://www.romulation.org/forum/index.php?topic=1462.0
     
  3. the game isn't freeze I can press the button but it doesn't allow me to continue from that screen :'(
     
  4. anandjones

    anandjones Well-Known Member

    Make sure you're using the latest firmware. http://www.linfoxdomain.com/ds/
     
  5. ShengLong200x

    ShengLong200x New Member

    Considering I have problems in emulation, It's not firmware.
     
  6. TirithRR

    TirithRR Well-Known Member

    When did you mention earlier you were using an emulator and not a card? Please read the "How to ask for Help" thread:
    https://www.romulation.org/forum/index.php?topic=1736.0

    Also, are you the same person as the thread creator? Please remember that you are only allowed to have one account.

    The thread creator says he was using an R4, so please do not post in another persons thread complaining about the help given not working for you.
     
  7. Luga

    Luga Well-Known Member

    I have the same problem. I think it the patcher worked but still...I see a screen about save data initilization then I go to the tittle screen. I see text in japanese blinking like it says Press Start or something. I press start, it blinks and goes away, then comes back. This loops for all eternity till I get pissed and turn it off.

    I am using AKAIO 1.4.1 Repack Proper.
    I have tried the following modes;
    NORMAL (BLUE) SAVING-DMA (GREEN) DMA (RED) all with the same result.
     
  8. anandjones

    anandjones Well-Known Member

    You'll need to wait for new firmware.
     
  9. ggrroohh

    ggrroohh Well-Known Member

    You have to patch it before playing.After patching only it workson my YSMenu
     
  10. Helltrain  04

    Helltrain 04 New Member

    I have the same problem as Kentang but I have only No$GBA
    What can I Do?
     
  11. anandjones

    anandjones Well-Known Member

    Make sure you have 2.6a and using no$zoomer. https://www.romulation.org/forum/index.php?topic=1462.0
     
  12. strikenoir213

    strikenoir213 New Member

    i also have the same problem for no$gba and already use no$zoomer but still wont work.
    what can i do?
    which emulator should i use?
     
  13. Luga

    Luga Well-Known Member

    Okay, I was stupid and had the same problem; but I found out the solution! Now put out in N00B terms!
    1 Download ROM
    2 Download Patch (Found on game comments!)
    3 Unzip ROM
    4 Unzip Patch
    5 Create new folder and call it "n00bcake"
    6 Place ROM and Patch in the n00bcake folder
    7 Drag and drop the ROM file on the PATCH.EXE applicaiton
    8 Go play another game while the patcher patchs
    CRITICALY IMPORTANT PART!!
    9 After done patching, transfer over the .NDS File! DO NOT TOUCH THE .BAK FILE! LEAVE THE .BAK FILE ALONE AT ALL COSTS!

    Here is why;
    I explain now to n00bs.

    .NDS file = the file you placed in the folder, patched now. Look at the time of the file compaired to one that you can newly unzip from the zip file! They are different!
    .BAK file = the .NDS file before it became patched.

    Also check to see that your flashcart is up to date.
     
  14. Acewing

    Acewing Active Member

     
  15. anandjones

    anandjones Well-Known Member

    Over to the MicroSD/media for your flashcart.
     
Thread Status:
Not open for further replies.