cant run a rom on ak2i akaio1.5

the ROM is Learning Maths nds (3214)
when i try to load game screen shows this:

the save data could not be accessed.
please turn the power off and reinsert the ds card.

i try different loaders, none worked. ???
Post Merge: [time]1254718650[/time]
my friend can run it well, but he has dstt.

 

Have you got the latest firmware?

 

Firmware's mostly the problem these days.

 

its akaio 1.5 on ak2i. i can run the newest games, why not this one>?

 

try to use AKAIO Loaders (Dated 05/10/2009)

 

i tried all different loaders and none worked.any other idea?

 

Try to FULL Format your memory card

or

may be there is something wrong with your Acekard hardware..

 

i dont think so, cause i can play 99.9% of the games, but this one, can any body with the same card and firmware try ? and maybe let me know

 

have you try to use AKAIO Loaders (Dated 05/10/2009) ?

 

i tried all loaders!!!!! i know this my be a stupid game, but i will like to know if somebody alse have this problem

 

Give me a few minutes, and I may be able to get the game to work.

 

sure

 

Try to use NO DMA MODE : PRESS A BUTTON While loading a game

This is should work

 

it worked!!! why, whats the difference???

 

DMA Mode

Games are loaded via DMA mode by default, which enhances performance in many games. AKAIO on the R.P.G. uses DMA on the microSD at all times and there is currently is no way to turn it off. On the AK2 DMA is active when the "Loading" text turns red or green.

As of v1.4.1 the new DMA-QuickSave mode has been made default. You can see that this mode is working when the "Loading" text turns green. This new mode fixes video and sound glitches which occur in older patching modes, and offers faster save writing/reading support.

The original DMA mode can be accessed by holding "X". You can see that this mode is working when the "Loading" text turns red. This uses the same patching method as holding "A" but with the benefit of DMA.

If you encounter a problem with a particular game, you can disable DMA mode by holding the "A" button while loading. In this case the "Loading" text will stay blue.

There is no way for users to force the execution of the old DMA mode or the non-DMA mode either globally or on a per-ROM basis. DMA-QuickSave will always run unless the user inturrupts its execution by pressing one of the above mentioned buttons. However, some problem ROMs have been preset through the loaders to access a particular DMA mode. This behavior is normal and can not be overridden. There is currently no collected list of the ROMs which have a preset DMA mode.

For games that are problematic with DMA mode, please make sure to first update the loaders to the most recent version. Updated loaders can be found at the Loaders Download Page or via Wi-Fi Update from within AKAIO. If you notice a problem even with the latest loaders, please visit the AKAIO ROM Compatibility Page. Add your problematic game as needed by following the on-site instructions.

http://wiki.gbatemp.net:8080/wiki/index.php?title=AKAIO

 

pressing the A bottom while loading this game ,will not affect the rest of my games?right?

 

It's good to hear it worked

I was just going to upload a patched version of the game.

 

nope..

 

thanks a lot, now i know

 

ur wellcome