1. This forum is in read-only mode.

4gb micro sd hc wont run

Discussion in 'Technical Help' started by mark8281, May 30, 2008.

Thread Status:
Not open for further replies.
  1. mark8281

    mark8281 New Member

    I have a M3 DS simply adaptor, it came with a 2gb sd card, since i have filled it to capacity with downloads, i ordered a larger micro sd hc 4 gb card. When i put on the firmware, it wont load onto the menu screen and just says loading on the top screen, however on the 2gb sd card it works perfectly. i have tried different version of the firmware but to no avail, i have formatted the card to fat32. does anyone have any ideas?
    Thanks in advance.
     
  2. Loonylion

    Loonylion Administrator Staff Member

    I believe the M3 does not support SDHC cards.
     
  3. jc_106

    jc_106 Well-Known Member

    So, you just bought the wrong card. Get a CycloDS, they seem to be the best.
     
  4. anandjones

    anandjones Well-Known Member

    No it does not, it's just like the R4 in compatibility with MicroSDs and SDHC cards. Refund it and get a Non-SDHC card if you wish to keep your M3 Simply or just refund it altogether.
     
  5. RISH

    RISH Member

    i beg to differ, if you check m3's web site it state's that the m2ds real accepts 4gb sdhc cards.
    I have a sandisk 4gb and it works fine, as far as i know this is the only make compatible over 2gb.
     
  6. RISH

    RISH Member

    sorry,
    just read it again the m3 ds simply won't take any card over 2gb.
    get a m3 ds real if you want to use a high capacity card ;D
     
  7. Loonylion

    Loonylion Administrator Staff Member

    Not quite. the M3 simply/R4 WILL take cards over 2Gb providing they are NOT SDHC cards. Non-SDHC cards over 2GB do exist, they are just very hard to find. Also, the CycloDS Evolution, among others, also supports SDHC cards.

    As a side note, please use the 'modify' button on the right hand side of your post instead of double posting.
     
Thread Status:
Not open for further replies.