Martin Korth and his new version of No$gba v2.8b released - with DSi emulation Download Free by his site: http://problemkaputt.de/gba.htm DSi emulation booting - finally (8 months work to get there) note: doing this on your computer will require several system files (which you probably don't have) (see DSi Emulation chapter in no$gba help for details) No$gba 2.8b Changelog: 01 Jun 2015 Code: - dsi/boot: runs eMMC bootcode (see new "DSi Emulation" chapter in help text) - dsi/cartloader: allows secure area above 23bfe00h limit (for dsiware only) - dsi/wifi: loads WIFI-DSI.BIN file (else auto-generates dummy wifi calibration) - dsi/boot: copies dsi-bios keys to tcm/wram, and console IDs to AES keyslots - dsi/help: added notes on initial itcm/wram/aes content after bios-rom-bootcode - dsi/debug: displays all known dsi registers in f10-iomap (except cam/tsc) - dsi/camera: prevents ndma if camera=off, prevents hang-up upon infinite ndma - dsi/aes: bugfixed handling of aes-irq-enable-bit - dsi/sdmmc: eMMC command support (CMD2,CMD7,CMD9,CMD10,CMD12,CMD13,CMD18) - hwreset: initializes [curr_clks_segment]=-1=none (fixes initial arm7bios clks) - hwreset: cleaned up init on reset (among others forced arm9-then-arm7 order) - dsi/ndma: supports timer0-3, filldatap, fixed irq details, fixed total limit - dsi/ndma/help: details on ndma irq(s), ndma total length, and ndma filldata - dsi/gamecart: supports dsi-blowfish encrypted commands (requires dsi bios) - dsi/gamecart: supports command 3dh (enter dsi mode, with dsi secure area) - dsi/gamecart: supports reset via 40001A4h.bit29=0 on DSi7 side (not tested) - dsi/sdmmc: supports SDIO commands, ie. ignores them and throws some error bits - dsi/memory: better MBK1..9 initializion on reset, added partial MBK9 support - dsi/aes/dma: supports AES_in and AES_out NDMA transfer startup modes - dsi/sdmmc/help: renamed nonsense "SEND" command names to "GET" or "SET" - dsi/sdmmc/debug: optionally logs sdmmc CMD/param's in tty debug log window - dsi/sdmmc: loads sector data from mmc-image file (for sdmmc read command) - dsi/sdmmc: obtains CID and CPU ID from mmc-image file (per-console IDs) - dsi/sdmmc: initializes sdmmc port 4004800-4004BFFh with some (guessed) values - arm/help: fixed "cache debug" numbering: p15,3,C15,Cn,0 (not p15,3,C15,C0,n) - layer setup: gouraud shading disable (force all vertices same as 1st color) - dsi/help: added info on DSiware files on internal eMMC and on software updates - nds/dsi/help: added details header[1Dh]=ds region, and on korean icon/title - dsi/help: added details on animated icon/title - poc: more accurate "garbage_byte" for memory areas without 8bit read access - poc: fixed several details in pocketstation bios clone - poc: better timing (freshen_waitcnt, ram/flash wait, 16bit/32bit bus, cpu clk)
Exactly ?.. - https://gbatemp.net/threads/how-would-we-dump-dsi-bios-emmc-and-wifi-flash-with-sudokuhax.390019/ Shame martin dose have it , as bios/firmware shown on the emulation pic .
@2ch - http://kanae.2ch.net/test/read.cgi/gameurawaza/1431385546/ Anyone good to come up with a Noise Reducer for 2.8a/b ?, thanks in advance! . Maybe Edit a.exe and memory.dll are some think - http://www.wikihouse.com/ndsemu/index.php?plugin=attach&pcmd=open&file=Tool.7z&refer=NO$GBA tools, http://ngemu.com/threads/external-programs-for-no-gba.117392/ Anyone need the UPX unpacker/repacker of no$gba then. http://ngemu.com/threads/external-programs-for-no-gba.117392/page-6#post-2326513 If you need OllyDBG for hooking addresses then - http://uploadmirrors.com/download/0UZ6LUNY/OllyDBG.rar or - http://verzend.be/8xh4rqz1nk5n
